background image

1

Congratulations on your purchase of the Samson 

L2400 or L3200 mixing console! The L2400 and 

L3200 are twenty-four and thirty-two channel, 

true 4 bus consoles, with USB input and outputs 

in ergonomically correct, attractively appointed 

enclosures. The L Series include professional 

features such as high quality mic pre amplifiers, 

3-band, swept mid EQ, 100 mm faders and 6 

auxiliary busses, with up to eight mixes possible. 

Connecting all your microphones and instruments is 

simple, with 16 mic/line inputs plus four additional 

stereo channels on the L2400, and 24mic/line 

inputs plus four additional stereo channels on the 

L3200. In addition, each console has two extra mic 

preamplifiers on the stereo channels, bringing the 

total number of mic inputs to 18 on the L2400 and 

26 on the L3200. There are also dedicated stereo 

effects returns for the onboard digital effects. And 

the effects! You can add one of 100 dazzling digital 

studio quality effects, which include Delays, Chorus, 

Flanging, and of course, lush Reverbs to your vocals 

or instruments using the onboard 24-bit multi-

effects processor. It’s easy to dial up your favorite 

effects preset with the large seven-segment LED 

display. Need more effects? The L Series’ employs 

two onboard 24-bit multi-effects processors. Plus, 

the L Series mixers have extensive auxiliary busses, 

allowing you to have complex combinations of 

effects on all the channels, or two different effects 

on different groups of channels. The auxiliary buses 

are also extremely flexible when it comes to monitor 

mixes and up to six simultaneous monitor mixes 

are possible. The L series consoles also feature 

a sophisticated onboard USB digital interface 

allowing you to record and playback digital audio 

from virtually any PC running most any recording 

software. The flexible routing option lets you 

assign the USB output to send the signal from the 

Main stereo mix, or use the aux sends to record a 

completely independent mix. The L2400 and L3200 

will give you clean, clear sound reproduction thanks 

to the advanced circuit topology, high quality 

components, low noise microphone preamps and 

super clean, low impedance mix bus design. The 

super-tough steel construction ensures reliable, 

high quality sound from venue-to-venue and 

performance-to-performance day in, and night out. 

Introduction

Perfectly suited for recording, live sound 

reinforcement and commercial installations, the 

L2400 and L3200 mixers are ideal solutions that 

offer plenty of inputs, sweet sounding effects and 

studio quality sound in a convenient package. 
In these pages, you’ll find a detailed description 

of the features of the L Series consoles, as well 

as a guided tour through its control panel, step-

by-step instructions for its setup and use, and 

full specifications. You’ll also find a warranty card 

enclosed—please don’t forget to fill it out and mail 

it in so that you can receive online technical support 

and so we can send you updated information 

about these and other Samson products in the 

future. Also, be sure to check out our website (www.

samsontech.com) for complete information about 

our full product line.
With proper care and adequate air circulation, 

your L-Series mixer  will operate trouble free for 

many years. We recommend you record your serial 

number in the space provided below for future 

reference.

Serial number: _________________________

Date of purchase: _______________________

Should your unit ever require servicing, a Return 

Authorization number (RA) must be obtained before 

shipping your unit to Samson. Without this number, 

the unit will not be accepted. Please call Samson 

at 1-800-3SAMSON (1-800-372-6766) for a Return 

Authorization number prior to shipping your unit. 

Please retain the original packing materials and if 

possible,  return the unit in the original carton and 

packing materials. If you purchased your Samson 

product outside the United States, please contact 

your local distributor for warranty information and 

service.

Содержание L2400





























Отзывы: