Using the Optional SP01 “Spider” Shock-Mount
7
Using the Optional SP01 Shock-Mount
1
2
For additional isolation the C15 can be fitted
on the optional SP01 “Spider” shock mount.
Follow the steps below the to install the
SP01.
•
First, screw the SP01 shock mount onto
your mic stand or boom arm. If you’re
using a US 5/8” mic stand or boom,
remove the Euro adapter.
•
Remove the C15 swivel mount by rotat-
ing the threaded collar counterclockwise
as shown in figure 1.
•
Install the C15 into the SP01 by fitting
the microphone into the center of the
web, positioning the C15 onto the bot-
tom mounting plate.
•
Secure the SP01 by reinstalling the
threaded collar, rotating clockwise until
tight. (Figure 2)
•
Now, loosen the thumb screw to adjust
the angle of the microphone and posi-
tion the C15 to the desired location.
Once set, tighten the thumbscrew to
secure the microphone in place.
Note:
Be careful not to cross thread
or over tighten the threaded collar or
thumb screw.
C15_ownman.indd 7
6/12/05 6:57:58 PM