Samson C.valve C Class Скачать руководство пользователя страница 2

Safety Instructions

Caution:

To reduce the hazard of electrical

shock, do not remove cover or back. 

No user serviceable parts inside. Please refer all
servicing to qualified personnel. 

WARNING

To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. 

The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.  

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important oper-
ating and maintenance (servicing) instructions in the literature accompanying the product.  

Important Safety Instructions

1. 

Please read all instructions before operating the unit. 

2. 

Keep these instructions for future reference. 

3. 

Please heed all safety warnings. 

4. 

Follow manufacturers instructions.   

5.

Do not use this unit near water or moisture. 

6. 

Clean only with a damp cloth.  

7.

Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 

8. 

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.  

9. 

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wide blade or third prong is provided for your safety. When the provided plug does not fit

your outlet, consult an electrician for replacement of the obsolete outlet.  

10. 

Protect the power cord from being walked on and pinched particularly at plugs, convenience recepta-

cles and at the point at which they exit from the unit.  

11. 

Unplug this unit during lightning storms or when unused for long periods of time.  

12.

Refer all servicing to qualified personnel. Servicing is required when the unit has been damaged in any

way, such as power supply cord or plug damage, or if liquid has been spilled or objects have fallen into

the unit, the unit has been exposed to rain or moisture, does not operate normally, or has been

dropped.

Содержание C.valve C Class

























Отзывы: