Samson 6111, Монтаж и эксплуатация

Страница: 17 / 28

EB 6111 EN 17
Technical data
9 Technical data
Type 6111 Rail-mounting unit Field unit
Explosion protection II 2 G Ex ia IIC T6 II 3 G Ex nA IIC T6
Input
4 to 20 mA (0 to 20 mA on request), for split-range: 4 to 12 mA or 12 to
20 mA, other signals on request
Load
Standard
Explosion-protected version
without switch-off electronics
≤ 6 V (corresponding to 300 Ω at 20 mA)
7 V (corresponding to 350 Ω at 20 mA)
≤ 4 V (corresponding to 200 Ω at 20 mA)
Out-
put
with Type 6112 i/p Module
0.2 to 1 bar (3 to 15 psi) (standard range)
0.4 to 2 bar (6 to 30 psi) (standard range)
Special ranges adjustable at the factory to meet customer specifications
Module A
Module B
Module C
Module D
Module E
Module F
Module G
Module H
Initial value
2)
0.1 to 0.4 bar
0.1 to 0.4 bar
0.1 to 0.4 bar
0.1 to 0.8 bar
0.1 to 0.8 bar
0.1 to 0.8 bar
0.1 to 1.2 bar
0.1 to 1.2 bar
Span ∆p
0.75 to 1.0 bar
1.0 to 1.35 bar
1.35 to 1.81 bar
1.81 to 2.44 bar
2.44 to 3.28 bar
3.28 to 4.42 bar
4.42 to 5.94 bar
5.94 to 8.0 bar 1)
Max. air output capacity
3)
2.0 m³/h at an output of 0.6 bar (0.2 to 1.0 bar)
2.5 m³/h at an output of 1.2 bar (0.4 to 2.0 bar)
8.5 m³/h at an output of 5.0 bar (0.1 to 8.0 bar)
Supply air
At least 0.4 bar above the upper signal pressure range value, max. 10 bar
without supply pressure regulator
Air quality acc. to ISO 8573-1:
2001
Max. particle size and density: Class 4 · Oil content: Class 3 · Pressure dew
point: Class 3 or at least 10 K below the lowest ambient temperature to be
expected
Power consumption 0.08 m
n
³/h at 1.4 bar · 0.1 m
n
³/h at 2.4 bar · Max. 0.26 m
n
³/h at 10 bar
Characteristic Characteristic: Output linear to input
Hysteresis ≤0.3 % of final value
Deviation from terminal-based
conformity
≤1 % of upper range value (for upper range values up to 5 bar); more
exact values on request
≤1.5 % of upper range value (for upper range values above 5 bar)
Effect in % of the upper range
value
Supply air: <0.1 %/0.1 bar
Alternating load, supply air failure, interruption of the input current: <0.3 %
Ambient temperature: lower range value <0.03 %/K, span <0.03 %/K
Dynamic response At an output of of 0.2 to 1 bar
Limiting frequency 5.3 Hz
Phase shift –130°
Variable position
Max. 3.5 % depending on mounting position: e.g. ± 1 % when mounted
horizontally
1)
Initial value raised up to 3.0 bar (special version)
2)
The max. possible output pressure is 8 bar.
3)
Measured with 2 m hose with 4 mm inside diameter.