Samson 4749, Монтаж и эксплуатация

Страница: 82 / 92

15-20 EB 4749 EN
IECEx Certificate
of Conformity
Certificate No.:
IECEx KIWA 19.0022X
Date of issue: 2019-10-10
Page 2 of 4
Issue No: 0
Manufacturer:
SAMSON AKTIENGESELLSCHAFT
Weismüllerstraβe 3
60314 Frankfurt
Germany
Additional
manufacturing
locations:
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with
the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was
assessed and found to comply with the IECEx Quality system requirements.This certificate is granted subject to the conditions as set out in
IECEx Scheme Rules, IECEx 02 and Operational Documents as amended
STANDARDS
:
The equipment and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found
to comply with the following standards
IEC 60079-0:2011
Edition:6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-1:2014-06
Edition:7.0
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-11:2011
Edition:6.0
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-31:2013
Edition:2
Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
This Certificate
does not
indicate compliance with safety and performance requirements
other than those expressly included in the Standards listed above.
TEST & ASSESSMENT REPORTS:
A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in:
Test Report:
Quality Assessment Report:
NL/KIWA/ExTR19.0025/00
DE/TUN/QAR06.0011/08