Samson 44-0 B, Монтаж и эксплуатация

Страница: 26 / 66

4-2 EB 2626-1 EN
Shipment and on-site transport
4.4 Storing the regulator
Risk of regulator damage due to improper
storage.
Î
Observe the storage instructions.
Î
Avoid long storage times.
Î
Contact SAMSON in case of different
storage conditions or longer storage
times.
Storage instructions
Î
Protect the regulator against external in -
fluences (e.g. impact).
Î
Secure the regulator in the stored posi -
tion against slipping or tipping over.
Î
Do not damage the corrosion protection
(paint, surface coatings). Repair any
damage immediately.
Î
Protect the regulator against moisture
and dirt. Store it at a relative humidity of
less than 75 %. In damp spaces, prevent
condensation. If necessary, use a drying
agent or heating.
Î
Make sure that the ambient air is free of
acids or other corrosive media.
Î
The permissible storage temperature of
standard regulators is –20 to +65 °C.
Î
Do not place any objects on the regula -
tor.
NOTICE !
We recommend regularly checking the regu-
lator and the prevailing storage conditions
during long storage periods.
Special storage instructions for elastomers
Elastomer, e.g. O-rings
Î
To keep elastomers in shape and to pre -
vent cracking, do not bend them or hang
them up.
Î
We recommend a storage temperature of
15 °C for elastomers.
Î
Store elastomers away from lubricants,
chemicals, solutions and fuels.
SAMSON's After-sales Service can provide
more detailed storage instructions on re-
quest.
Note
Tip