Samson 43-8, Монтаж и эксплуатация

Страница: 22 / 32

22 EB 2178 EN
Operation
6 Operation
See Fig. 2.
6.1 Adjusting the set point at
the control thermostat
The ambient temperature at the set point ad-
juster must not be higher than 35 °C.
The temperature set point is continuously ad-
justable.
To adjust the set point, proceed as follows:
1. Set the target temperature set point by
turning the black adjustment knob (9) ac-
cording to the scale (see Fig. 7).
− Turn the adjustment knob clockwise
(

) to reduce the temperature set
point.
− Turn the adjustment knob counter-
clockwise (

) to increase the tem-
perature set point.
2. Pull the wire through the lead-seal hole
(19) at the control thermostat (30) and
lead-seal it to fix the adjusted tempera -
ture set point.
0
1
2
3
4
2,5
40
45
50 60
65
Temperature set
point in °C
Scale marking
0
1
2
3
4
Scale marking on the
control thermostat
Fig. 7: Set point adjustment