manualshive.com logo in svg

Samson 43-1, Монтаж и эксплуатация

Поделиться
Скачать
Samson 43-1 Скачать руководство пользователя страница 25

EB 2171 EN 

 25

Mounting and assembly

5  Mounting and assembly

Valve and control thermostat can be assem-
bled before or after the valve has been in-
stalled in the pipeline. We recommend first 
installing the valve without the control ther-
mostat into the pipeline.

5.1  Preparation for installation

Proceed as follows:

 

Î

Flush the pipelines.

The plant operator is responsible for clean-
ing the pipelines in the plant.

Any impurities carried along by the process 
medium may impair the proper functioning 
of the regulator. We recommend installing a 

strainer (e.g. SAMSON Type 1 NI) upstream 

of the pressure reducing valve (see sec-

tion 6.3.1).

 

Î

Check the valve and control thermostat to 
make sure that they are clean and not 
damaged.

 

Î

Check to make sure that the type desig-
nation, valve size, material, pressure rat-
ing and temperature range of the valve 
and control thermostat match the plant 
conditions (size and pressure rating of 
the pipeline, medium temperature etc.).

 

Î

Check any mounted thermometers to 
make sure they function.

Note

Note

6  Mounting and start-up

Risk of overheating due to excessive ambient 

temperatures or insufficient heat dissipation 

when components are insulated.

 

−

Do not include the regulator in the insula-
tion of the pipeline.

Risk of impaired functioning of the regulator 
and leakage at the joint due to installation 
under tension.

 

−

Bolt the regulator to the pipeline free of 
stress.

 

−

If necessary, support the pipelines near to 
the connections.

 

−

Do not attach supports directly to the valve 
or control thermostat.

NOTICE

!

NOTICE

!

NOTICE

!

Содержание 43-1













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды