Samson 42-24 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 24

Samson 42-24 Скачать руководство пользователя страница 9

EB 3003 EN

9

Installation

5

Installation

The

Type 42-24

and

Type 42-28

Regulators

are designed for installation in the

high

pressure

(flow) line of the plant.

The

Type 42-24

and

Type 42-28

Regulators

are designed for installation in the

low pres-

sure

(return flow) line of the plant.

Î

Choose a place of installation that allows
you to freely access the regulator even af-
ter the entire plant has been completed.

Î

Install a strainer (e.g. SAMSON
Type 2 N) upstream of the regulator (see
section 5.2).

Î

Flush the pipeline thoroughly before in-
stalling the regulator to ensure that any
sealing parts, weld spatter and other im-
purities carried along by the process me-
dium do not impair the proper function-
ing of the valve, above all the tight shut-
off.

Î

The direction of flow must match the di-
rection indicated by the arrow on the
body.

NOTICE

Incorrectly installed regulator

The pressure regulator can be dam

-

aged.

−

Make sure the regulator is installed

free of stress.

−

Do not attach supports (if required)
directly to the valve or actuator. At

-

tach the supports near to the con-

necting flanges.

−

Observe permissible mounting po-

sition.

5.1

Mounting position

See Fig. 1 on page 7.

See Fig. 2 for permissible mounting positions.

Standard mounting position

· Install valve

without actuator in a horizontal pipeline with
the connection for the actuator facing down-
wards. Make sure the medium flows through
the valve in the direction indicated by the ar-
row.

Fig. 2:

Permissible mounting positions

Connect the actuator to the valve bottom sec-
tion using the coupling nut (11).

Balanced by a bellows or

diaphragm

−

Standard mounting position

All versions

Balanced by a bellows

−

Above 80 °C

−

Steam applications

Balanced by a bellows

−

All versions DN 15 to 80

plus up to max. 80 °C

Balanced by a diaphragm

−

All versions up to max. 80 °C

Balanced by a bellows

−

Versions with fixed plug

guide

«
...
7
8
9
10
11
...
»

Содержание 42-24

























Отзывы:

Нет отзывов