Samson 3275A, Монтаж и эксплуатация, Страница: 21 / 52

EB 8314-1 EN 4-3
Shipment and on-site transport
3. Carefully lift the actuator. Check whether
the lifting equipment and accessories can
bear the weight.
4. Move the actuator at an even pace to the
mounting site.
5. Mount the actuator onto the valve (see
the 'Installation' section).
6. Remove slings after mounting and re-
place the cover on the eyebolt (see
Fig. 4-2 and Fig. 4-1).
Fig. 4-1: Eyebolt cover in place on the eyebolt Fig. 4-2: Eyebolt cover (with strap) opened
Fig. 4-3: Lifting point on the actuator Fig. 4-4: Lifting points on the control valve
(example)