Samson 3271, Монтаж и эксплуатация, Страница: 18 / 36

18 EB 8310-8 EN
Measures for preparation
4. Mount the actuator to the valve. See sec -
tion 5.1.
5. Remove slings after mounting.
We recommend using a hook with safety
latch (see Fig. 3). The safety latch prevents
the slings from slipping during lifting and
transporting.
Lifting the entire control valve assembly
A swivel lifting hook can be screwed into the
female thread on the top diaphragm case
(see section 3.4 on Accessories). The swivel
lifting hook is designed for setting a control
valve assembly upright.
Î
See associated valve documentation for
instructions on how to lift a control valve.
4.3 Storage
Risk of actuator damage due to improper
storage.
− Observe storage instructions.
− Avoid long storage times.
− Contact SAMSON in case of different stor‑
age conditions or long storage periods.
We recommend regularly checking the actu‑
ator and the prevailing storage conditions
during long storage times.
Tip
NOTICE !
Note
Fig. 3: Lifting point on the actuator
Storage instructions
− When the valve and actuator are al -
ready assembled, observe the storage
conditions for control valves. See associ
-
ated valve documentation.
− Protect the actuator against external in -
fluences (e.g. impact).
−
Do not damage the corrosion protection
(paint, surface coatings). Repair any
damage immediately.
−
Protect the actuator against moisture and
dirt. Store it at a relative humidity of less