Translation of the original operating instructions
Type 327
© 1994 - 2022 SED Flow Control
41
BA220002 Version:
a
Vo
rl
ag
e
: d
o
k360 (
c)
3.
Transport / Storage / Disposal
3.1.
Delivery
3.1.1.
Scope of delivery
Immediately after receipt of the delivery, please verify that the contents are not damaged, and the type and
scope of the delivery complies with the data stated on the delivery note.
By checking the order number, please verify that the goods received comply with the versions you ordered.
In case of irregularities, please contact us immediately.
Notice
When using a pneumatic positioner, a suitable mounting kit is required to ensure functionality, see section 5.2.
However, this kit is not included in the scope of delivery of the valve.
If you have ordered a valve as a complete unit with mounting kit and pneumatic positioner, these are already
preassembled and preset at the factory. A check of the function in the installed state must be carried out
nevertheless.
3.1.2.
Notification about damage
Damage resulting from inadequate packaging or during transport must be communicated to the shipping
company, the insurance, and the supplier immediately after delivery of the consignment.
3.2.
Transport
Notice
If the guidelines are not reserved, the device may be damaged!
▪
The device must be transported in impact-resistant packaging.
▪
During transport, the device must be protected against humidity and dirt.
▪
The approved ambient temperature of
–
10 °C to +55 °C must not be exceeded through the impact of
heat or cold.
