Samson 3259, Перевод оригинальной инструкции

Страница: 25 / 56

EB 8059 EN 25
Measures for preparation
4.3 Storage
Risk of valve damage due to improper stor -
age.
−
Observe storage instructions.
−
Avoid long storage times.
−
Contact SAMSON in case of different stor -
age conditions or long storage periods.
We recommend regularly checking the con -
trol valve and the prevailing storage condi -
tions during long storage periods.
Storage instructions
−
Protect the control valve against external
influences (e.g. impact).
− Do not damage the corrosion protection
(paint, surface coatings). Repair any
damage immediately.
−
Protect the control valve against moisture
and dirt. Store it at a relative humidity of
less than 75 %. In damp spaces, prevent
condensation. If necessary, use a drying
agent or heating.
− Make sure that the ambient air is free of
acids or other corrosive media.
−
The permissible storage temperature of
standard control valves is –20 to +65 °C.
Contact SAMSON's After‑sales Service
department for the storage temperatures of
other valve versions.
−
Do not place any objects on the control
valve.
Special storage instructions for elastomers
Elastomer, e.g. actuator diaphragm
−
To keep elastomers in shape and to pre-
vent cracking, do not bend them or hang
them up.
− We recommend a storage temperature of
15 °C for elastomers.
−
Store elastomers away from lubricants,
chemicals, solutions and fuels.
SAMSON's After‑sales Service department
can provide more detailed storage instruc
-
tions on request.
4.4 Preparation for installation
Proceed as follows:
Î
Flush the pipelines.
The plant operator is responsible for clean -
ing the pipelines in the plant.
Î
Check the valve to make sure it is clean.
Î
Check the valve for damage.
NOTICE !
Note
Note
Tip
Note