manualshive.com logo in svg

Samson 3244-1, Монтаж и эксплуатация, Страница: 13 / 20

Поделиться
Скачать
Samson 3244-1 Скачать руководство пользователя страница 13

EB 8026 EN 

 13 

Maintenance – Replacing parts

2.  Remove the actuator from the valve bon-

net.

6.1 

Standard valve version

6.1.1 

Packing

1.  Unscrew the lock nut (6.2) and stem con-

nector nut (6.1) from the plug stem.

2.  Unscrew the threaded bushing (5.2).
3.  Remove body nuts (1.1).
4.  Lift the valve bonnet (5) off the valve 

body over the plug stem.

5.  Pull all the packing parts out of the pack-

ing chamber using a suitable tool.

6.  Replace damaged parts.
7.  Clean the packing chamber thoroughly.
8.  Remove gasket (1.2).
9.  Carefully clean the sealing faces in the 

valve body and on the bonnet.

10. Apply a suitable lubricant to all the pack-

ing parts and to the plug stem (6).

11. 

Insert a new gasket (1.2) into the valve 

body.

12. Place the valve bonnet over the plug stem 

onto the valve body and secure it with 

nuts (1.1).

13. Carefully slide the packing parts (4.1, 

4.3 and 4.2) over the plug stem into the 
packing chamber. Make sure you ob-
serve the proper order.

14. 

Screw in the threaded bushing (5.2) and 

tighten it.

15. 

Loosely screw the lock nut (6.2) and stem 
connector nut (6.1) onto the plug stem.

16. 

Mount the actuator. Refer to section 3.1.

17. Adjust the upper and lower bench range 

values. See section 3.1.

4.2

5.2

5

4.3

4.1

6

4.1

Spring

4.2

PTFE ring packing

4.3

Washer

5

Bonnet

5.2

Threaded bushing

6

Plug stem

Fig. 3: 

Packing

Содержание 3244-1





















Отзывы:

Нет отзывов