6
4. Fasten the headers where drilled with a large screw. These
nails and screws are temporary and are removed aFer leveling.
1. Sweep the area where the gazebo will be installed; it is easy
to work on a pao without any debris.
2. Lay out the eight headers in an octagon shape. The gazebo
has three entrances. Rotate them to your liking.
3. Fasten each of the headers together with large nails ONLY
half way.
5. Repeat steps 3 and 4 for the remaining seven corners.
6. Measure the inside headers to make sure the eight headers
form a perfect octagon. Adjust the header posions unl the
distances are all the same for opmal results.
This is a template for
post posions.
Rotate it to face your
house or pathway.
Front Entrance
Si
de
E
nt
ra
nc
e
Sid
e E
ntr
an
ce
