Instructions
:
1. Use the alignment stick to drill holes into the
preferred wall position. Cables can be passed
either through the wall and the back of the
junction box or through the bottom opening.
2. A 3/4” conduit is required for routing cables
outdoors or in a wet environment.
3. Install the cable gland and pass the cable
through the junction box
4a. For the SC21 Bullet Camera, connect the
tether wire between camera & junction box.
b. Connect all other wires to the camera.
c. Secure the camera to the box.
5a. For the SC11 Dome Camera, route the cables
through the bracket, arm mount, and
mounting adapter and through to attach to the
dome camera.
b. Secure the bracket to the junction box and
finish following the instructions on the
ACC-SC-MNT-A1 Arm Mount Installation Guide.
1
3
4
5
2
7
x4
a
b
c
a
b
