ADC
Sams elektronik d.o.o. • [email protected] • www.sams.rs
elektronik
17
Converters
from
0.000μs
to 63.963μs
This menu is used to select the incoming signal.
The options are: CVBS, YC, YUV, Betacam, RGB.
The factory setting is CVBS.
Select an option by pressing the UP / DOWN keys.
1. INPUT
Once you have selected the option, press the “MENU / BACK” button. Option is temporarily saved.
Once you have selected the option, press the “MENU / BACK” button. Option is temporarily saved.
Menu - Input
Menu - HV Blank
Sel.Menu
Input
AD-12fs
Sel.Menu
HV Blank
AD-12fs
2. HORIZONTAL / VERTICAL BLANKING
This menu is used for pass / remove information that is contained in the horizontal and vertical
blanking.
Choose one of options:
- PASS ALL - allow all the information contained in the horizontal (embedded audio) and vertical blanking
(from 6 to 22 lines);
- KILL ALL - remove all information contained in the horizontal and vertical blanking.
The factory setting is PASS ALL.
Select an option by pressing the UP / DOWN keys.
