Sampo DR-S0426, Руководство пользователя

Страница: 12 / 29

10
RECORD SETUP
RECORD MODE MUX
NORMAL RECORD FPS 30P
ALARM RECORD FPS 30P
ALARM RECORD DWELL 10SEC
RECORD QUALITY HIGH
MOTION MIGRATION ON
EXIT
4. RECORD SETUP
Press
▲
or
▼
key on "RECORD SETUP" &
◄
or
►
to enter:
Use the
▲
or
▼
button to select items.
Press the
◄
or
►
button to confirm the
selection.
Press MENU back to SETUP MENU.
1.
RECORD MODE MUX/QUAD
Use
◄
or
►
button to select MUX (multiplexer) or OD (QUAD) recording.
NORMAL RECORD FPS 1/2/3/4/5/7/10/15 & 30P
Use
◄
or
►
button to select recording speed. 15P means 15 fields per second, 30P
is the highest speed, and 1P is the lowest. There are 1 / 2 / 3 / 4 / 5 / 7 / 10 / 15 &
30 you can choose, NTSC default 15P, PAL at 12P.
2. ALARM RECORD FPS 1/2/3/4/5/7/10/15 & 30P
Use
◄
or
►
button to select alarm recording speed when external alarm or motion
detection is triggered. There are 1 / 2 / 3 / 4 / 5 / 7 / 10 / 15 & 30 you can choose,
NTSC default 30P, PAL at 25P.
3. ALARM RECORD DWELL 1~30SEC
Use
◄
or
►
button to set the dwell time for alarm recording when external alarm or
motion detection is triggered. There are a total of 30 speeds you can choose from 1
to 30. When external alarm is triggered and within the dwell period: the screen will
be switched into quad mode. The corresponding camera will be marked ID "EXT" or
"ALM", default 10 seconds..
4. RECORD QUALIT BEST/HIGH/MEDIUM/LOW
Use
◄
or
►
button to select the BEST, HIGH, MEDIUM or LOW setting so there is a
total of four levels of recording quality that can be chosen from. Higher quality &
higher the amount of storage will be consumed. Thus, this setting should be
carefully chosen as it will affect the usage of hard disk storage. A table at cheap 6
for relationship between quality, recording speed and hard disks is attached for
reference.
5. MOTION MIGRATION ON
Use
◄
or
►
button to select add detected motion into event list or not, and the
default setting is on