SamplexPower SEC-1212, Руководство пользователя

Страница: 3 / 16

SAMLEX AMERICA, INC. | 3
SECTION 1 | Important Safety Instructions
CAUTION: RISK OF ELECTRIC SHOCK! DO NOT OPEN!
WARNING—TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. THERE ARE NO USER SERVICEABLE PARTS INSIDE—
REFER TO QUALIFIED SERVICE PERSONNEL.
The following safety symbols will be used in this manual to highlight safety
and information:
WARNING!
Indicates possibility of physical harm to the user in case of non-compliance.
!
CAUTION!
Indicates possibility of damage to the equipment in case of non-compliance.
i
INFO
Indicates useful supplemental information.
Please read before using your power supply:
1. It Is recommended that you return your power supply to a qualified Samlex dealer for
any service or repair. Incorrect assembly may result in electric shock or fire.
2. To reduce the risk of electric shock, unplug the power supply from the outlet before
attempting any maintenance or cleaning. Turning off controls will not reduce this risk.
3. An extension cord should not be used unless absolutely necessary. If an extension cord
must be used make sure that the pins on the plug are the same number, size and
shape as those of the original power supply plug.
4. Place the unit in an area that will allow air to flow freely around the unit. DO NOT
BLOCK OR OBSTRUCT vent openings on the side/bottom of the unit.
5. Keep the unit away from moisture and water.
6.
NEVER operate the units in parallel.
WARNING!
Your power supply should be grounded to reduce the risk of electric shock. The power
supply is equipped with grounding conductor and grounding plug.
The cord must be plugged into an outlet that is properly installed and grounded in accord-
ance with all local codes and ordinances. Never alter the AC cord of plug provided. If the
cord will not fit the outlet, have a proper outlet installed by qualified electrician. Improper
connection can result in risk of electric shock.
DO NOT USE THE POWER SUPPLY FOR DIRECT CHARGING OF BATTERY OR DIRECT
CONNECTION TO A BATTERY FOR BATTERY BACK-UP.
(Please read the section on
Battery Back-up).