OPERATING & SAFETY FEATURES
Important : Each of the following operating procedures and safety
features must be carefully reviewed and thoroughly understood
prior to using the inverter. Failure to do so may result in damage to
the inverter or equipment or serious personal injury
a.
ON/OFF Switch. This switch controls the flow of power from the
power source to the inverter. It does not control the power running
from the inverter to the equipment or appliance
being operated.
b. High Temperature LED Indicator Light. This light will turn RED
and the inverter will automatically shut down when the internal
temperature exceeds design parameters for safe operation. When
this occurs, turn the equipment or appliance off.
In the event of excess temperature, the High Speed Cooling Fan also
will automatically turn on. Overheating may result when the inverter is
being operated at levels exceeding its wattage rating or because it
has been placed in a location or in a manner which prevents proper
heat dissipation. After approximately 15 minutes, the High Tempera-
ture Indicator light and the Cooling Fan will turn off and the inverter
will automatically restart indicating that the inverter temperature has
dropped to a safe operating level.
c.
Over Load LED Indicator Light. This light will turn RED and the
inverter will automatically shut down when the continuous power draw
from the inverter exceeds the maximum continuous power rating for
the inverter. Turn the inverter OFF (0), determine and resolve the
cause of the overload prior to resuming operation of the equipment or
appliance. Turning the inverter ON (I) will re-set it.
FEATURES, CONTROLS & INDICATIONS
Page 5