SAMLEX AMERICA, INC.
| 2
11004-BW-01-0914
BATTERY MONITOR BW-01 |
OWNER'S MANUAL
Programming Procedure: Brightness of LED Display:
The unit comes
Specifications
preset with brightness of the LEDs set at Normal (Bright). The brightness can be dimmed or
the LEDs can be switched OFF. Settings can be changed with the help of the Programming
Button (5, Fig 1). Settings are performed in sequential order in a loop: Bright
»
Dim
»
OFF
»
Bright
»
Dim
»
OFF… repeats the loop.
For changing the Setting: Press and hold Programming Button
»
Beep will be heard
»
Release the Button.
Please note that when the LED display is switched OFF, the Buzzer alarm protocols stay
active in the background. Hence, if Under Voltage / Over Voltage condition is activated,
the LED display and Buzzer alarm protocols for the abnormal condition will be activated.
Programming Procedure: Alarm Thresholds / 3-Day Timer
Thresholds of Low Voltage / High Voltage Alarms and Timer ON / OFF settings are
programmed with the help of Programming Button (5, Fig 1) and by monitoring the LED
and Buzzer indication patterns.
CAUTION! Alarm thresholds are to be programmed
only when the voltage is between 10.5V and 13.3V (for 12V battery) and between
21V and 26.6V (for 24V battery). In this condition, the LEDs / Buzzer will not be
indicating (i) “charging” i.e., will not be displaying “Walking LEDs – Fast+Beep” or
“Walking LEDs – Slow” or (ii) "Low or High Voltage Alarm".
Programming Modes are SEQUENTIAL as shown in the sequence given below. This means
that in order to access programming of the desired parameter, it will be necessary to pass
through the previous programming positions. Press Programming Button (5, Fig 1) and
hold it in pressed condition. Release the Button ONLY when the LED + Beeping pattern for
the desired parameter is displayed.
The sequence starts with Programming Mode for Low Voltage Thresholds first followed by
High Voltage Thresholds and then followed by Timer ON/OFF.
Before the start of each
Programming Mode, all the 3 LEDs and buzzer will blink simultaneously 3 times.
To
START
, press Programming Button (5, Fig 1) and hold it in pressed condition.
Release
the Button ONLY when the LED + Beeping pattern for the desired parameter is
displayed.
» Long beep » {(Red+Green+Beep) » (Red+Green+Beep)}…
3 Times (Low Voltage Threshold Programming Menu starts)
LOW VOLTAGE MENU STARTS
12V Battery
24V battery
(Red + Beep) - 3 blinks
10.5V (Preset)
21V (Preset)
(Red + Beep) - Steady
10.6
21.2
(Red + Beep) - 3 Blinks
10.7V
21.5V
(Red + Beep) - Steady
10.8V
21.6V
( Beep) - 3 Blinks
10.9V
21.8V
( Beep) - Steady
11.0V
22.0V
( Green + Beep) - 3 Blinks
11.1V
22.2V
( Green + Beep) - Steady
11.2V
22.4V
{(Red+Green+Beep) » (Red+Green+Beep)}… 3Times
(High Voltage Threshold Programming Menu starts)
HIGH VOLTAGE MENU STARTS
12V Battery
24V battery
St
eady Red + Long Beep
14.8V
29.6V
Steady Long Beep
15.3V
30.6V
Steady Green + Long Beep
16.0V
32.0V
Long Pause
(3-Day timer Programming Menu Starts)
3 DAY TIMER ACTIVATION
Short B
eep (No LED)
3-Day Timer ON
Battery System Voltage............................ 12V / 24V (Auto Detection)
Input voltage Range ...............................................7 VDC to 32 VDC
Input current ........................................................... Less than 30 mA
Battery Input Connectors.......¼” / 6.3 mm Male Quick Connect Tabs
Input Wiring .............................................................AWG # 22 to 26
Fuse* ......................................................................................... 0.5A
Dimensions, mm.......................................................... 65 x 65 x 25.5
Weight .................................................................................... 35 gm
* In series with Positive wire preferably within 7” from the Battery Positive
Samlex America Inc. (the “Warrantor”)
www.samlexamerica.com
DETAILED PRODUCT INFORMATION
For a complete user manual including specifications, application notes, installation
instructions, trouble shooting and more, please visit the web page for this product on
www.samlexamerica.com. Product page can be found using the “Search by Model”
field.
Long Pause
2
DAY TIMER DE-ACTIVATION
Long Beep (No LED)
3-Day Timer OFF
Programming sequence ends. Release Programming Button
