H9
www.samon.nl - [email protected]
V1-2023-EN
****1932 - >>>
20
5.4
Gear drive maintenance.
The gear drive is filled in the factory with gearbox oil (SAE 90).
NOTE!!!
The gearbox oil must be replaced every 2 years.
5.4.1
Topping up the gear drive oil.
•
Make sure the SAMON Onion Lifter is standing on a flat, level surface.
•
Remove the PTO shaft.
•
Remove the plug at the rear of the gear drive.
•
Fill the gear drive with oil (SAE 90) until oil starts coming from the plug.
•
Put the plug back in place.
•
Mount the PTO shaft
5.4.2
Replacing the gear drive oil.
•
Remove the PTO shaft.
•
Remove the drive shaft.
•
Remove the gear drive from the frame.
•
Remove the plug at the rear of the gear drive.
•
Drain the gear drive and collect the oil in a container - make sure to dispose of it in ecologically
responsible manner.
•
Put the gear drive back in the frame.
•
Fill the gear drive with oil (SAE 90) until oil starts coming from the plug.
•
Mount the plug.
•
Mount the drive shaft.
•
Mount the PTO shaft
