www.larius.com
10
DRAGON
ED.
14 - 10/2020 - Cod. 150178
Fig. 1H
CHECK ON POWER SUPPLY
ELECTRICAL SAFETY PRECAUTIONS
• Check the switch is on the “OFF” position before connecting
the cable to the mains
.
• Never carry a plugged-in equipment
.
• Disconnect the equipment before storing it and before perfor
-
ming any maintenance operation or replacing of accessories
.
• Do not carry the equipment neither unplug it by pulling the
electric cable
.
•
Protect the cable from heat, oil and sharp edges
.
• When the tool is used outdoors, use only an extension cable
suited for outdoor use and so marked
.
• Take care when the pumping rod is moving.
Stop the machine whenever someone is within its vicinity
.
• Repairs of the electrical equipment should only be carried
out by skilled personnel, otherwise considerable danger to
the user may result.
SETTING-UP
CONNECTION OF THE FLEXIBLE HOSE TO THE GUN
• Connect the high pressure flexible hose
(
H1
)
to the pump
(
H2
)
and to the gun
(
H3
), ensuring to tighten the fittings
(
the
use of two wrenches is suggested
).
NEVER
use sealants on fittings’ threads.
It is
ADVISED
to mount a high pressure manometer at the
pump outlet
(see on page “Accessories”)
to read the product
pressure.
• It is recommended to use the hose provided with the standard
kit
(
ref.18036
).
NEVER
use a damaged or a repaired flexible
hose.
H1
H2
H3
The high speed of travel of the product in the hose
can create static electricity through discharges
and sparks. It is suggested to earth the equipment.
The pump is earthed through the earth cable of
the supply.
The gun is earthed through the high pressure
flexible hose.
All the conductors near the work area must be
earthed.
Avoid approaching too much to the pump piston
rod when the pump is working or under pressure.
A sudden movement of the piston rod can cause
wounds or finger squashing.
Never spray over flammable products or solvents
in closed places.
Never use the tooling in presence of potentially
explosive gas.
Always check that the product is compatible with
the materials composing the equipment (
pump,
spray gun, flexible hose and accessories
) with
which it can come into contact. Never use paints
or solvents containing Halogen Hydrocarbons
(
as the Methylene Chloride
). If these products
come into contact with aluminium parts can
provoke dangerous chemical reactions with risk
of corrosion and explosion.
Never attempt to tamper with the calibre of
instruments.
H
Make sure that the electrical system is earthed
and complies with regulations.
