2
853 806 R. 07/21
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
EN
2021_07_23-14:00
WARNINGS
Compressed air operated piston-type reciprocating pump. This high
flow capacity pump is compatible with mineral and synthetic grease
and suitable for large installations with long lengths of piping
supplying several outlets simultaneously. This pump is mounted
directly on 50 kg and 185 kg drums. A shorter pump is also available
(531730, 531731) with a bundled male 3” camlock, suitable for
horizontal direct assembly to bulk containers.
WARNING:
Read all instruction manuals, tags, and labels
before operating the equipment. This equipment is for
professional use only.
!
• The use of non compatible fluids may cause damage in the pump
and serious personal injury. This equipment is not intended for use
with fluids that fall within the Group 1 fluid as defined that are
explosive, extremely flammable, highly flammable, flammable, very
toxic, toxic, oxidizing or where the vapor pressure if greater than 0,5
bar (7 psi) above the pressure atmospheric at the maximum
allowable temperature.
• The pump generates high or very high pressures. Do not exceed the
maximum air inlet pressure of 7 bar (100 psi).
• A direct hit against the human body may result in an injury.
• This unit may have stored pressure, release all pressure and
disconnect from any fluid systems before servicing. To ensure safe
operation of this unit, all service work should be by qualified
personnel only.
• When not in use, be sure to shut off the air supply to avoid accidents.
• Do not alter or modify this equipment. Use only Samoa Industrial,
S.A. genuine components. Any unauthorized tampering with this
equipment, improper use, poor maintenance or removal of
identification labels may invalidate the guarantee.
• All fittings in the system connected to the outlet of the pump should
be suitable for the maximum possible pressure generated by the
pump/air motor. If the systems cannot be designed to take the
maximum pressure produced by the pump, safety valves or diverter
valves should be fitted.
Fig. 1