ENGLISH
10
DISPLAY (LCD)
1
3
6
5a
5b
4
2
1.- "ALPHANUMERIC" INDICATOR:
SHOWS THE PRODUCT'S WEIGHT IN KILOGRAMS, THE ALPHANUMERIC INDICATOR
CAN SHOW
THE FOLLOWING READINGS:
OVRLOAD
IS SHOWN WHEN THERE IS AN OVERWEIGHT ON THE SCALE.
NEG.
IS SHOWN WHEN THERE IS A NEGATIVE WEIGHT.
LOWBAT
.
IS SHOWN WHEN THE BATTERY DOES NOT HAVE ENOUGH ENERGY.
HELP
IS SHOWN WHEN YOU TURN ON THE SCALE WITH AN EXCESSIVE WEIGHT.
UNLOAD
IS SHOWN WHEN THE SCALE IS TURNED ON WITHOUT THE PLATE.
HI LMT?
LO LMT?
IS SHOWN WHEN THE SCALE IS READY TO SET ALARM LIMITS.
2.- (
)"low battery" indicator:
Is shown when the energy of the battery is too low, this indicator turns on to tell us that it is
necessary to recharge it.
3.- "AC/DC" power supply indicator:
When the ac/dc power supply is connected to the scale this indicator turns on.
4.- "Zero" indicator :
These references to zero indicate that the scale is ready to start weighting products. The zero
indicator disappear when a load is placed on the scale.
5a.- "Net" indicator:
Indicates that the "tare" function has been activated. The readings shown correspond to the net
weight.
6.- "Low" alarm indicator:
When it is setting low alarm limit or when low limit is displayed, or when weight is lower than low
alarm limit this indicator turns on.
7.- "High" alarm indicator:
When it is setting high alarm limit or when high limit is displayed, or when weight is higher than
high alarm limit this indicator turns on.
