Sammic HM-1035P, Руководство пользователя

Страница: 19 / 44

9
How to use the oven electronic controls
(HM-1035 P)
Programmed buttons
The oven comes from the factory with buttons 1-10 preset.
To reset buttons 1-10 or to program buttons 11-19 proceed as follows.
1. The door can be open or closed with the screen displaying: 0.
2. Press the PROGRAM button.
• The screen displays PROGRAM.
3. Press the number key that you want to program.
• If you program button 4, the screen will display PROG- - 04.
4. Press the POWER LEVEL button to select the necessary power level.
• If you want you can press the POWER LEVEL button to change the
power level (some models).
• The screen displays POWER LEVEL.
- 100% means 100% microwave power, 80% means 80%, 60%
means 60% and 40% means 40% microwave power. When you
press the power level button continuously, the power level will
cycle through each of the levels continuously.
5. Press the desired number buttons(s) to program the necessary cooking time.
6. Press START/+30 SEC to save the program for Stage 1.
• To program Stage 2 or stage 3, repeat steps 4 and 5.
• If you do not want to program Stage 2 or Stage 3, press
STOP/RESET to end the programming sequence.
NOTE: If you close the door or press STOP/RESET before you finish
programming, the changes are lost and the microwave exits
the programming mode.
The screen
displays
When you press PROGRAM, the screen will
display PROGRAM.
ENGLISH