Sammi Paytech Sammi Paytech SmartPay Plus, Краткое руководство пользователя

Страница: 18 / 66

Page 18 6/24/2010
Chapter 5 Resetting SmartPay Plus
Resetting means closing all applications and refreshing RAM (Random Access memory)
This is done in two ways:
5.1 Warm Reset
If handheld hangs in between and stops responding, please perform warm reset.
In order to perform warm reset, press (one touch) software reset button till handheld starts rebooting.
Warm reset restarts the handheld by closing all the running programs. Always try warm reset first, if
handheld do not respond, then try cold reset. The data which is not saved will be deleted and the saved
data will remain in the appropriate directory.
5.2 Cold Reset
A cold reset clears the entire contents of RAM, including programs and data loaded in the Object Store
(system memory). But the data on the “Flash Disk” will remain as it is, so it is necessary to store the
important applications on “Flash Disk” before cold reset.
The memory capacity of “Flash Disk” is 512MByte.
The operating system is reloaded and any applications set up for automatic installation are reinstalled.
Cold reset is only recommended when all other procedures fail and SmartPay Plus stops working.
Follow the instructions below for the cold reset
Method 1
1 Release the lower clip of the hand strap.
2 Remove the battery pack.
3 Slid backup battery switch down and then again up to reset backup battery.
4 Reinstall the battery pack.
Following screen shots shows the cold reset functioning.