Samlex Europe WSC-1215, Руководство пользователя

Страница: 25 / 31

25
9 Using the Charger
ENG
Note
• The temperature sensor is only working in I, Uo and U phases.
• The output voltage is adjusted according to the function -25mV/°C for WSC-1215, WSC-1215SB,
WSC-1230 and WSC-1230SB, and -50mV/°C for WSC-2408 and WSC-2415. However, the maximum
output voltage is 15V/30V, and the minimum is 13.2V/26.4V.
• When the battery temperature detected via TF-100 reaches 55°C, the charger will stop the charging
process ("E.Q." LED flashing Red and "STATUS" LED lights Orange), and auto recover when tempe-
rature drops to 45°C.
• The output voltage from option 2A charging output for WSC-1215 and WSC-1230 is fixed, NOT adjus-
ted according to TF-100.
9.4 Fan Speed
The fan speed is adjusted according to the load and the temperature inside the charger.
When the load is over 70% of the chargers' amp rating, the fan will turn in 100% speed.
If the load is below 70% of the chargers' amp rating, the fan speed will be determined
according to the temperature inside the charger.
When the temperature goes up, the fan will start turning with temperature 45°C, and reach
100% speed with temperature 65°C.
When the temperature goes down, the fan will slow down the turning speed with
temperature 60°C, and stop turning with temperature 40°C.
9.5 Functional check
The status LED in the front of the unit can be used to check the status of the charging
process.
Note
The optional remote controller can also be used to check the status of the charging process. The LEDs
on the remote controller indicate different charging phases with their colors respectively.
Figure 22 Fan Speed