User Manual
20
Do not place the cable under rugs, carpets or similar covers. Try to place cables away from areas
where someone is likely to stumble.
Do not squeeze nor bend the cable nor use it if harmed.
This device has an overheating protection system that will turn off the heating units in case of
overheating or abnormal conditions. If this happens, turn off the device, disconnect it and let it cool
down for a few minutes. After you have done this, you can reconnect it and start using it again.
Do not try to open or repair this equipment by yourself. By doing so, it could cause you personal
harm.
When you finish each treatment, turn off the unit and disconnect the cables. Wait for some 10
minutes for the panels to cool before you remove treated objects. Never let heating panels touch
your skin immediately after treatments.
After your last treatment carefully clean with a dry cloth those parts of the equipment that have
been in direct contact with the floor. After doing so, fold the equipment carefully and put everything
back into its carrying bag.
CAUTION: Some parts of this equipment can get very hot and cause skin burns. Be specially careful if
children or other vulnerable persons are around.
WARNING: To prevent overheating do not cover control unit nor overlap heating surfaces of control
panels. This device should not be placed below a power socket.
Note: Some objects are particularly sensitive to heat and could be damaged if exposed to the
temperatures reached during treatments. To minimise risk of any damage, these objects should not
be treated and should be kept apart during the duration of any treatment.
