Heat Wrap
2.1 Assembly
1. Each Heating Panel has a Velcro tape all around it, on the
upper side is the female Velcro, on the lower side is the male
Velcro. The panels can be united with this mechanism, it is
suitable for flat surfaces, and it is even possible to wrap the
object to be treated with a single panel, uniting its male and
female Velcro straps.
2. Each Heating Panel has a total of 14 eyelets all around;
with the use of a stapler, the panels can be adhered to other
wooden surfaces, whether they are flat or in any other shape.
The staples used in this procedure are so small that do not
cause any damage to the treated surface.
2. OPERATION MODE
This epigraph contains all the details required to set up the SAMITECH Heat Wrap Smart and get it ready
to carry out the treatment.
Before plugging in any part of the system, you must make sure you perform a full check of the cables for
any cuts or damages. If you find any, then do not proceed with the treatment and inform us immediately.
4
