User Manual
13
MANUAL ECOWOOD 2.0 EN.DOCX 03/10/2022
Safety Instructions
Please read the instructions carefully before using this equipment.
The operator must respect at all times the safety measures detailed in this manual.
The operator assumes all responsibility for the improper use of the equipment.
Use this device only as described in the manual. Any other use may cause fire, explosion, electric shock,
damage to equipment, objects, or injury to humans
Resin warnings and wood impregnations
Resin and various wood impregnation products can be heated above desired treatment temperature,
liquefy and spill on other surfaces or the main unit itself. Be careful with the presence of these
substances when performing a treatment.
Fire warnings
Objects that are composed of combustible, flammable or explosive materials, or objects that may
become combustible, flammable or explosive when in high temperatures should not be treated. Keep
any combustible, flammable, or explosive material out of reach of equipment.
Large metal objects such as structures, coatings or metal plates should not be treated, both inside the
wood and in the area behind the treated area. In general, nails, screws and small metal elements are
not a problem, but it is recommended to have them properly located and pay special attention if sparks
or clicks occur during treatment. When in doubt, avoid treating sensitive areas or areas with the
presence of metals.
Do not treat an object if you do not know its composition or have doubts about its reaction when
heated.
Do not jeopardize in any case the safety of objects, equipment and the place where you are performing
the treatment.
Make sure you have the proper fire detection and extinguishing equipment before beginning a
treatment.
