general aspects related to safety and use of the salt spreader which the operator should take
into account.
Carefully inspect the attachment, its couplings and controls and read the relevant
instructions before use.
Operator
The attachment may be used only by a person who has read this Operator’s manual and is
familiar with using the attachment. The operator’s health condition must be normal; the
attachment must not be used while under the influence of alcohol or drugs. Respect the
requirements to the operator of the base machine.
Working place
Operator’s working place, while the attachment is in operation, is the cab of the base
machine. All persons must be clear of the salt spreader while it is in operation.
The working area must have sufficient lighting (ambient lighting / lighting of the base
machine).
The salt spreader is an attachment for use by a single operator. The operator must ensure
that other persons stay clear of the attachment while it is in operation.
Never go under the attachment, regardless of whether it is in operation or not!
Before use:
Read the Manual
Inspect the attachment
Check that the fixings of the attachment are properly attached to those of the base
machine
Check the greasing of the attachment
Read and respect the safety instructions
Check whether the roller and the mixing shaft rotate in the intended direction.
The PTO shaft must be in right measure. In need please use different shaft or cut it
into right measure.
Check that the fastening bolt between PTO shaft and gear box is fastened correctly.
Operating instructions
If the roller or mixing shaft gets jammed for any reason, stop the attachment immediately
and find out the reason for jamming!
The attachment has been designed and manufactured with due regard to the safety of the
operator and other persons. Nevertheless, ensure that there are no other persons near the
spreader while in operation.
