Index revision : C - March 2016
12
7105
3. Description of spray gun and GNM 6080 control module
NANOGUN-MV
spray guns are designed to spray paint or clear coat whose resistivity is greater than
0.5 M
Ω
.cm only.
The configurations
LR
can moreover spray hydrodiluable paints or clear coats when they are equipped
with the suitable produced means of supply. The use of any other type of paint is excluded.
NANOGUN-MV
spray guns are to be connected to the
GNM 6080
control module.
The
models in the
NANOGUN-MV
range can be differentiated by their air cap, air cap ring, the base
support and the paint hose.
3.1. Functions available on spray gun
• The switch (Item1) allows to start or to cut the high voltage.
When this switch is on the position " I ", an action on the trigger starts up the high voltage.
When this switch is on the position " 0 ", an action on the trigger does not start the high voltage.
• The notched button on the back of the gun (Item 2) allows to regulate the product flow.
• The side notched button (Item 3) allows to regulate the dimension of the spray.
Characteristics
NANOGUN-MV JR06
Super Vortex Round Spray - Low Pressure - Dia: 6
mm
NANOGUN-MV JR08
Super Vortex Round Spray - Low Pressure - Dia: 8
mm
NANOGUN-MV JR12
Super Vortex Round Spray - Low Pressure - Dia: 12
mm
NANOGUN-MV JP
Flat Spray - Low Pressure - Dia: 12 mm
1
2
3
