Safety instructions
10
Security devices
Attention
Guards (motor cover, coupling guard, housings,
...) are set up for safe use of the equipment.
The manufacturer cannot be held responsible for
any bodily injury as well as failures and / or
damage to the equipment resulting from the
destruction, the occultation or the total or partial
removal of the protectors.
Never exceed the maximum working pressures of
the equipment components.
Danger of Pressure
Safety requires that a pressure relieve shutoff valve be mounted on
the pump motor supply circuit to allow trapped air to escape when
the air supply is shut off.
Without this precaution, the residual air from the engine may cause
the motor pump to operate and cause a serious accident.
Similarly, a
material bleed valve
must be installed on the material
circuit so that material pressure can be relieved (after shutting off air
motor and decompressing it) before any intervention on the
equipment. These valves should remain closed for air and open for
the material during the procedure.
