SAMES KREMLIN Cyclomix Evo Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 169

SAMES KREMLIN Cyclomix Evo Скачать руководство пользователя страница 7

7

Member of Exel group

DRT582165110

A - 2023/03

1. Health and safety instructions

1.1. Configuration of the certified equipment

This manual defines the configuration of the certified equipment.

1.2. Marking

1.2.1. Marking of ATEX and non-ATEX boxes

Each device is marked with the name of the manufacturer, the reference of the device and the important information

for the use of the device: air pressure, electrical power.
This equipment has been designed in accordance with ATEX Directive 2014/34/EU and is intended for use in

use in area 1.

This equipment therefore complies with the following provisions:

• ATEX Directive (2014/34/EU): II 2 G - group II, category 2, gas).
• The EU Declaration of Conformity and the UKCA Declaration (specific to the UK market) are included in this

document as annexes in this document as appendices.

«
...
5
6
7
8
9
...
»

Содержание Cyclomix Evo










































































































































































Отзывы:

Нет отзывов