![background image](http://html.mh-extra.com/html/sames-kremlin/910029883/910029883_user-manual_804644013.webp)
Index revision : A
13
7145
4.3. Starting
• Connect the peripheral equipment (spray gun or projector, powder pump, PLC, vibrator,
etc.) (
).
• Connect the air and fluid supplies(
• Connect the mains plug to the control module (
).
The control module can then be started by pressing the key
The control of the Inobox module is done through the different screens or with the help of a PLC
in the case of a CAN connection.
Remarks
:
If the spray gun is not connected when the module is switched on, the control module will wait
(see start screen) until a piece of equipment is connected to it.
4.4. Functions available from the Inobox control module
The control module allows the display of the various operating parameters (voltage, current,
powder flow rate, etc.) and their settings by means of the various keys available on the front
panel of the module.