Doc.-ID: 180516-PT10BA-ES-RoughCam IPM1145-(L)_en_rev.01.docx, page 25 of 40
5.4.2
Opening the housing
Opening the housing of the RoughCam IPM1145-(L) is allowed for exchanging/extracting
the SD storage c
ard or in case a “Hardware Reset“ of the camera module is necessary.
After completion of the work, the enclosure has to be tightened securely again. Please be
very careful and follow thoroughly the steps of this manual.
If the T10 RoughCam IPM1145-L is equipped with a protection roof, this has to be re-
moved first. To do so, loosen the 4 x 8mm screws M4*0.7 situated on the both ends of
the brackets (figure 5.10 and 5.11).
Figure 5.10
– Removing the protection roof (1/2)
Figure 5.11
– Removing the protection roof (2/2)
To open the stainless steel enclosure (T11 VA2.1.x.x) of the RoughCam IPM1145-(L),
loosen the eight hexagon socket screws (DIN 912/ ISO 4762) located at the cable gland
flange of the stainless steel housing, including the washer springs (DIN 127 A) (q.v. fig-
