Doc.-ID: 131106-PT03BA-SS-ExCam niteZoom_en_rev.01, page 17 of 24
Technical data Sony FCB-EX20DP:
Figure 5.9 ExCam
®
niteZoom
– lens and sensor board
Lens type
Motorzoom
Lens
10x optical zoom f=5.1 mm (wide) to 51 mm (tele) (F1.8 to F2.1)
Digital zoom
12x (120x with optical zoom)
Sensor
1/3“-Super-HAD-CCD II
Focal distance
5.1 mm
– 51.0 mm
Horizontally angle of view
52.0° (wide)
– 5.4° (tele)
Effective pixel count
440,000
Shutter time
1/1 to 1/10000 s (22 steps)
Shutter time
16 steps
Minimal illumination
0.25 lux (F1.8, ICR off, 150 s)
Recommended illumination
100 … 100000 lux
Synchronisation system
Internal/ external (V-Lock)
MOD (Min. Object Distance)
0.01 m (wide end) to 0.8 m (tele end), 0.15 m (standard)
Information!
If not determined differently, the default setting of the ExCam
®
nite-
Zoom is wide angle. This means that after the camera has been dis-
connected from the power supply and has been rebooted, it is set to
wide angle mode and standard focus (auto functions are disabled).
In case that the ExCam niteZoom is supposed to resume certain set-
tings after the reboot, it is possible to configure
„PRESETS“ via the
FCB Control Panel, the video server or the VISCA Control Board.
