Conference System User Manual
SAMCEN
31
②
Select the “Protecol Type”: click the down arrow in the selected box, select the right protocol of the camera
which you select on Step 2, then click “OK” behind that selected box, you will hear a “Di” sound after a
few seconds. You can do the next step only after the “Di” sound appeared.
③
Select the “Deme Bpe”: click the down arrow in the selected box, select the right baud rate of the camera
which you select on Step 2, then click “OK” behind that selected box, you will hear a “Di” sound after a
few seconds. You can do the next step only after the “Di” sound appeared.
※
Step2 and Step3 correspond to each other
Step2 and Step3 For example, there are three cameras:
Camera 1: Protecol Type is Protecol-D, Baud rate is 9600
Camera 2: Protecol Type is Protecol-D, Baud rate is 2400
Camera 3: Protecol Type is Protecol-P, Baud rate is 2400
Setting step: First, select camera 1 (according to Step2). Second, to set “Camera setting”, tick the empty box in
