23
OPERATOR'S MANUAL
REAR DISC MOWER
XT
5.2.
Control panel
Mower’s controlling is performed with use of one of tractor’s hydraulic sections and control panel
located in tractor’s cabin
. Action to be performed is chosen by operator with buttons on the panel
and then performed with use of tractor's hydraulics.
Fig. 16.
Control panel
–
functions
CAUTION:
To provide correct control of the machine when in operation, it is necessary to
enable the floating section of distributor which the main hydraulic system of the
machine is connected to.
5.2.1.
Setting hydro-pneumatic unloading of the mower
In order to set pressure in working system, first press button (
3
)
on control panel (
),
then use lever to control the tractor's external hydraulics (making oil flow from tractor to working
system will cause increase of pressure in the system).
CAUTION: Set the pressure in the working
system before starting the mower, as otherwise unloading cylinder may be damaged.
Activation of button (
3
)
is indicated by switching of LED above the button from the left (
5
)
OFF position to the right (
4
) ON position. To return from pressure setting position to working position,
press the button (
3
)
again.
CAUTION: Automatic override to working position will follow after 1
minute - even without the need of the operator's action
. Return to working position is indicated by
switching of LED above the button from the right (
4
) - ON position to the left (
5
) - OFF position.
Gas pressure in the accumulator and in the entire system should be set, depending on the mower
).
1 - Switch ON/OFF for position
of driving on headlands
3 - Switch ON/OFF for position
of pressure setting
2 - LED for switch ON or OFF
of the headlands position
4 - LED for switch ON
of position of pressure setting
5 - LED for switch OFF
of position of pressure setting
2
1
4
5
3