Operator's Manual
Round bale wrapper
Spin S, Spin F
- 22 -
8.3.
Wrap counter
8.3.1.
Wrap counter system
Wrap counter L-02
The wrap counter is an electronic device used for counting the wraps on a bale and may be
used on all types of wrapping machines. The wrap counter should be installed in the tractor’s cabin
in a place where it is visible and accessible to the operator.
The counter kit comprises of:
1)
Pre-programmed counter in a plastic casing,
2)
Revolution sensor,
3)
Bundle of wires,
4)
Multi-contact connection.
Fig. 24. Wrap counter
Protect the counter against humidity, excessive vibration and hitting the cabin elements, and
especially against falling on a hard surface. The counter can be fixed using its back surface catch.
WARNING!
Protect the meter from water, chemical agents, direct atmospheric
precipitation, frost, high temperature in excess of 50°C and direct exposure
to sunlight.
The revolution sensor attached to an unmoving part of the wrapping machine operates in
conjunction with a magnet attached to the rotary frame which passes impulses to the revolution
counter. Each rotation of the bale is counted and displayed on the revolution counter display. When
the programmed number of revolutions is performed, the counter signals the completion of the
wrapping process with a blinking light and sound signal. The counter may be programmed to a
required number of revolutions between 10 and 49.
Revolution sensor
Connect the revolution sensor installed in the cabin to the power source (12V) and
revolution sensor using the specially prepared bundle of wires.