SaMASZ KDT 220, Руководство оператора

Страница: 14 / 52

14
KDT REAR DISC MOWER OPERATOR’S MANUAL
❑
When driving on the road after work, check to make sure that the tires and soil working tools are
clean to prevent the road surface from becoming dirty.
❑
Make sure that the machine is not damaged during transport.
4.4.1. Putting the mower onto another vehicle for transport
The driver and the carrier are responsible for the mower’s transport safety. Equip ment and parts must
be secured during transport. To put the mower onto another vehicle in a safe way, please obey the
following rules:
❑
Transport should be done by qualified and specifically trained personnel,
❑
Grab the mower by any lifting devices only in places indicated by hook sign ( Fig. 5 ),
Fig. 5. Transport holders
❑
For mower lifting, use only lifting devices with hoisting capacity larger than mower’s weight shown
in data plate. This also applies to ropes and chains used for lifting,
❑
Do not lift if transport belts, belt suspensions, ropes are damaged. Whenever damage to these
parts occurs, replace with new ones,
❑
When mounting slings, chains, handles etc., always set the machine's center of gravity properly,
❑
To safely support the machine, use ropes of adequate length so that the angle between them is no
greater than 120°, and the angle between the strand and the vertical is no greater than 60°,
❑
Lift the machine with the utmost caution and move it slowly,
❑
No one should be within the range of action of the lifting equipment when any transporting
operations are being carried out,
❑
Collapsible parts should be blocked in transport position,
❑
When the mower is on the vehicle’s trailer, the machine sh ould be secured against moving.