4
Connecting the Power Adapter and Routing your peripheral cables
1.
To access the ports on the unit, you must remove the
plastic cover on the rear of the unit.
2.
Locate the handle and lift straight up(not out) to
remove the cover.
3.
If you are going to be connecting multiple peripherals
to the terminal, now is also a good time to remove
the back panel that covers the cable routing section.
Simply pull the panel straight back to remove it. The
image to the right is an example of what the cable
routing section looks like with the rear panel
removed.
4.
Verify that the power adapter cable has been routed
through the casing of the terminal and that the plug
end is located by the ports.
5.
Connect the plug to the port labeled DC-IN(19V)