03. Connecting Peripherals
System Installation
◀ 2 - 8 ▶
Receipt Printer
Install & Test
–
Install and Replace Paper Roll
Make sure to use paper rolls that meet the standard.
Non-standard paper rolls may cause printer malfunction.
Note!
Do not open the printer cover while printing.
Note!
Strongly push the center of the printer cover for
the proper paper discharge.
Note!
1. Pull and open the printer cover as shown.
2. Remove the used paper roll inside if there is.
3. Insert the paper roll as shown.
4. Pull out a small amount paper as shown and close the cover.
5. Tear off the paper as shown.
Introduction
System Installation
Make sure of
installation area
Before connecting
peripherals
Connecting Peripherals
Connecting Serial Port Devices
such as Barcode Scanner
Connecting RJ-11 Cash Drawer
Connecting RJ-45 LAN Cable
Connecting USB Device
Connecting PS Module
Connecting Security
/ Scanner Module
Connecting Receipt Printer
Receipt Printer
Dismantle the Cover
for Customer Displays
Connecting DVR Card
Connecting AC Power
Cord to the Set Plug
Cable Management
System On / Off
System Use
System Expansion
& Dismantle
Appendix A
System Set-Up
Appendix B
System Structure
▶
▶
▶
▼
SPT-7000
HOME Contents Help Print Exit
?
