58
S-Mode Programming
ER 380/380M Electronic Cash Register v2.9
Clearing Memory
Before you use your
ER-380/ER-380M
for the first time, you must perform a memory all clear to
insure that all totals and counters are cleared and that the default program is installed.
CAUTION: The procedures described in this area are security sensitive. Clearing the
ER-380/ER-380M memory after the register is put into service will erase all programming as
well as totals and counters. Do not share this information with unauthorized users and
distribute the special SERVICE-Mode key only to those you may want to perform these
functions.
Memory All Clear
1.
Unplug the register.
2.
Turn the control lock to the
S
position.
3.
Press and hold the key position where the
CHECK
key is located on the default
keyboard layout.
4.
Continue to hold the
CHECK
key while plugging the register into a power source.
5.
Press the upper left key of the keyboard, then the lower left key, then the upper right key,
and finally press the lower right key.
6.
After a short delay, the printer will print the message: "RAM ALL CLEAR OK !"
Memory is cleared and the default program is installed.
Clear All Totals and Counters
1.
Turn the control lock to the
S
position.
2.
Enter
20
and press the
SBTL
key.
2
0
SBTL
1
2
3
4
Содержание ER-380
