Sam4s ER-150II, Инструкция по программированию и эксплуатации

Страница: 16 / 31

16
Enter 05000 for 5% Tax Rate
Enter 06500 for 6.5% Tax Rate
Tax Programming
The ER-150II may be programmed to tax items at either a straight
percentage tax rate, or on based on a tax table.
Entering a Straight Percentage Tax Rate
The ER-150II will accept a 5 digit tax rate, with the decimal point fixed
at three places (00.000). If your area taxes goods based on a straight
percentage, enter the rate in the following manner.
1. Place mode switch in P position.
2. Press 1 and then enter the five digit tax rate.
3. Press TAX .
Examples:
Formulating a Tax Table
In some locales where taxes do not follow straight percentage rates, it is
necessary to enter the tax table.
Before beginning tax table programming, obtain a local tax chart and
determine tax breaks for your area.
Determine the lowest amount to be taxed, and the amount of tax that is
added at that point (some areas add .05 at the first breakpoint). Next
determine the tax break points by checking the chart for the highest
amount allowed before each penny of tax is added. The difference
between the high amounts (before each penny is added) determine the
tax break point.
1
0 5 0 0 0 TAX
1
0 6 5 0 0 TAX