Sam 271, Инструкция по применению

Страница: 18 / 36

18 Product Support 1-888-202-9831
11.3. ATTACH APPLICATOR TO PATCH
A. Remove the circular seal from the top of
the Patch to reveal the coupling media
within the gel cup (Figure 9A).
B. While supporting the edges of the cup
with your fingers, align the applicator, face
down, above the cup and coupling media
(Figure 9B).
C. While continuing to support the edges
of the cup, firmly press the applicator
down onto the center of the gel cup
until a clicking noise is heard or clicking
sensation is felt
(Figure 9C).
If using dual applicators, repeat these steps with
the second applicator and the second Patch.
Note: When the applicator is pressed down onto
the gel cup, keep your fingers on the back of
the patch, keeping them on the edges of the
cup and NOT at the center of the Gel pack.
Note: Do not be concerned if coupling media
flows out the edges of the gel cup. Wipe any
excess coupling media away with a tissue or
towel
Note: Ensure the applicator is fully attached to the
Patch.
figure 9A: Removing Foil Seal
figure 9B: Attach Applicator
figure 9C: Press Applicator Down