SAM Electronics AIS 3410, Техническое руководство

Страница: 20 / 84

AIS 3410, Electronics Unit
ED3047G842 / 01 (2009-08)
Technical Manual
2 Overview
2.10 Media Converter Installation (necessary for ships with BNC LAN networks)
t_ue_e02.fm / 27.08.09
20
2.9.3 Merge the AIS 3410 Electronics Unit into the UAIS DEBEG 3400 Housing
1. Insert the Electronics Unit from the AIS 3410 and
mount it on the distance bolts with the six M6 nuts.
2. Take the new Phoenix plug (connector 4) and
connect the cables again.
Connect to the 24V interface the cables from24V
power supply, fan and media converter.
3. Connect the GPS- and the VHF connecting cable to
the internal GPS- and VHF-connector.
The LAN network has to be connected via the media
converter.
The coaxial connector of Ethernet LAN, mounted on
the housing, cannot be used any more
(GE4034G010, Mat-Nr.: 271259883).
4. Fasten all ship cables at the bracket again.
Fig. 2-9 AIS 3410 Electronics Unit (without housing)
2.10 Media Converter Installation (necessary for ships with BNC LAN networks)
The media converter has to be installed between the AIS 3410 and the BNC LAN plug of the ship´s
network.
1. Mount the mounting plate including the media
converter on the wall or on the ground near
to the AIS 3410 Electronics Unit.
2. Put the BNC LAN plug of the ship´s network
into the BNC jack of the media converter.
3. Put one side of the Ethernet LAN cable (with
2 RJ-45 plugs) into the RJ-45 jack of the
media converter.
4. Undo the 4 screws of the casing cover of the
AIS 3410 and take the casing cover off.
5. Put the other side of the Ethernet LAN cable
into the LAN jack of the AIS 3410 rear panel
(
Figure 2-9 ).
6. Put the casing cover on and fasten the 4
screws.
distance bolt
new Phoenix plug
GPS
VHF
LAN
to s c a le
Dr a wing i s not tr u e
RJ-45 (connection to AI S 3 410)