23
2.3 Changing the user code (by a user, without the master code.)
Please note – the user code may not be the same as the master code!
Make sure that the safe door is open when you change the code (ON – user code – ENTER).
The new user code is now set. If the new code is not accepted, you hear a long signal and a red light flashes. In
that case, start again at step 1 for changing the user code.
After changing the code, it is best to test the new code several times with the door open.
Step
Action
Key
Signal
1.
Press ON
ON
2.
Press Enter
Enter
3.
Press 3
3
4.
Press Enter
Enter
5.
Key in the current user code, e.g. 111111
111111
6.
Press Enter
Enter
7.
Key in the new user code, e.g. 222222
222222
8.
Press Enter
Enter
9.
Repeat the new code, e.g. 222222
222222
10.
Press Enter
Enter
2.4 Deleting the user code
Only with the master code can a user code deleted.
Only the master code remains valid. If the user code deletion is unsuccessful, you hear a long signal and a red
light flashes. In that case, start again at step 1 for deleting the user code.
Step
Action
Key
Signal
1.
Press ON
ON
2.
Press Enter
Enter
3.
Press 0
0
4.
Press Enter
Enter
5.
Key in the master code, e.g. 567891
567891
6.
Press Enter
Enter
