Salvis Master VisionPRO, Руководство по сборке

Страница: 33 / 72

Assambly instruction Cooking station 33 / 72
2.6 Attaching the type labels
Electrical installation modules
−
On the installation module
−
In the electrical installation compartment
(group identification see chapter 2.6.1!
−
In the open base cabinet (for double-row
installation elements, attach in the open
base element on the corresponding side)
Gas installation modules
−
On the installation module
−
In the gas installation compartment
−
In the open base cabinet (for double-row
installation elements, attach in the open
base element on the corresponding side)
D
The sign “Gas notice” is supplied with the
product documentation (operating instruc­
tions).
2.6.1 Group identification on the type label
Type label
Group1234567891011121314151617181920
Group identification
Type labels in the electrical installation compart­
ment provide group information.
.
Mark the respective group on the type label, as
shown in the example.
D
Example for type label for induction hob with two
generators: One group for each generator. The­
refore, two groups are marked.
2.7 Checking the cooking station at the factory
.
Check flatness of the top section and document (tolerance approx. 1 mm).
.
Check gas installation modules when assembled, following the test instructions.
.
Check electric installation modules when assembled, following the test instructions.
.
Check for leaks:
−
Water supply
−
Water drain
.
Check precise fit of the attachment parts:
−
Cover panels for installation compartments
−
Side panels
−
Operating panels, etc.
To side wall in the base cabinet:
Type label(s)
Electrical
installation compart­
ment
In the gas installation compartment:
Type label(s)
Sign “Gas type”
Behind the front cover
panel on the distribu­
tion pipe:
Sign “Gas type”
Specifications for assembly at the factory